Old caulking and window glazing putty can contain asbestos, and in Windsor a test costs $200 to $350 for one or two sealants, or $300 to $600 for a visit that covers the perimeter caulking, the putty and the finishes around the openings in one trip, with lab results in 2 to 3 business days. Ontario's Ministry of Labour lists caulking and putties among the materials that may contain asbestos, and Health Canada names putty, caulking and sealants among older building products that still can. We test only. We do not scrape, seal, remove or replace anything, so the answer costs the same whichever way it comes back.
The question usually arrives with a quote. A window company has measured the openings, a door is being swapped, a painter is pricing the exterior, or someone is going round the house with a caulking gun before winter and finds a hard grey bead under the newer white one. Each of those jobs scrapes or cuts an old sealant, and the sealant is the one material on the list nobody thinks to ask about. This page covers where those sealants sit on a Windsor house, which jobs disturb them, why Windsor's housing stock carries more of them than most Ontario cities, how many samples the rules call for, and what the test costs.
Call (226) 773-8831 with the age of the house and what is being replaced or scraped. We will tell you which beads are worth sampling and which are not, before anything is booked.
Rather just talk?
(226) 773-8831Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.
- Testing and surveys only, never abatement
- CALA-accredited lab, certificate included
- Results in 2 to 3 business days
Something disturbed today? Call, don't wait.
Or send the details
We respond the same business day with a firm price.
The short answer
- Caulking and putty are on the official suspect list. The Ministry of Labour's sample list of suspect asbestos-containing building material, in its guide to O. Reg. 278/05, has a line for "Caulking/Putties", with separate lines for base flashing, roofing felt, joint compounds and cement siding. The Ministry calls it a general guide adapted from the US EPA list, not a complete one.
- Health Canada says the same. Its asbestos page lists putty, caulking and sealants among older building materials that may still contain asbestos, and its standing advice is to hire a professional to test before renovating or remodelling.
- Nobody can tell by looking. Old caulking that has gone hard and grey, soft bead that was applied last decade, and glazing putty that has been painted twenty times all look like what they are, which is paint and age. Only the lab result separates them.
- The job decides the sample list. A sash swap touches the putty. A full window or door tear-out cuts the perimeter bead and the trim. Re-siding and repointing disturb every exterior joint on that wall. Test what the job will touch, not everything.
- Test before the install date, not on it. Results take 2 to 3 business days. Window companies in Windsor book weeks out in the fall, so there is almost always time to sample before the crew arrives.
Nine sealant joints on a Windsor house, from the ground up
People say "the window caulking" as though it were one bead. On an older Windsor house there are usually several different sealants from several different decades, and under the regulation each one that looks and feels different is a separate material with its own sample count.
| Joint | Where you find it in Windsor | What usually disturbs it |
|---|---|---|
| Basement window frames | Steel or wood frames set into concrete block or poured foundations, bedded in mortar and a sealant bead, often behind a window well | Egress window cuts, basement waterproofing, replacing rusted frames |
| Perimeter caulking at brick | The bead between the window frame and the brick veneer on 1940s to 1970s houses, often recaulked over rather than cut out | Full-frame window replacement, brick repointing, exterior painting |
| Glazing putty on wood sashes | The hard compound holding each pane in a pre-war double-hung sash, usually under many coats of paint | Sash replacement, reglazing, paint stripping |
| Putty on steel casements | The same compound on the steel sashes found in some 1940s and 1950s houses and in commercial and institutional buildings | Window replacement, rust repair |
| Storm window bedding | The sealant under the frames of aluminum storm windows added to older houses | Removing storms before a window replacement |
| Door frames and thresholds | Caulking at the brickmould and under the sill of exterior doors | Door replacement, porch and step rebuilds |
| Siding trim and butt joints | Sealant at the corners, trim and joints of transite cement siding and at the J-channel of later siding | Re-siding, painting, replacing damaged boards |
| Flashing and roof joints | Sealant at chimney counterflashing, roof-to-wall flashing and vent boots; the Ministry list has its own lines for base flashing and roofing felt | Re-roofing, chimney repair, replacing a vent |
| Expansion and control joints | Sealed joints in brick, block and concrete on larger houses, garages, commercial fronts and institutional buildings | Masonry restoration, waterproofing, facade work |
The bead you can see is usually the newest one on the house, and the newest one is the least likely to matter. Windsor houses get recaulked over, not cut out. A soft white bead that takes a fingernail was run in the last decade or two. Look where it has pulled away from the brick: the hard grey material behind it is the original, and that is what the installer's knife goes through.
Which jobs disturb these sealants
Window replacement. How much is disturbed depends on the method. An insert unit set inside the old frame mainly touches the putty on the sashes being removed and any bead the installer scrapes so the new caulk will stick. A full tear-out cuts the perimeter bead free, pulls the exterior trim, often cuts the brick or siding back, and opens the interior returns, which on a pre-1980 Windsor house means plaster or asbestos-era joint compound as well. Ask the window company which method is quoted before you call us, because it sets the sample list.
Door replacement. The same two methods apply to an exterior door. A slab swap touches nothing. A pre-hung unit in a new frame cuts the caulking at the brickmould and the sealant under the threshold, and on a brick house usually disturbs the mortar at the jamb.
Re-siding and repointing. Stripping old cladding takes every joint on that wall with it: the perimeter beads at each window, the trim sealant, the flashing at the roofline. Repointing a brick veneer runs a grinder along the mortar joints, and on many Windsor houses the window perimeter bead sits right against the mortar it is cutting.
Exterior painting. Painters scrape loose caulk and recaulk before priming, and on wood sashes they scrape and reglaze. That scraping is exactly the disturbance that matters, and it happens on every opening at once.
Fall draft-proofing. The one people miss. The standard energy-saving job before a Windsor winter is to cut out failed exterior caulk and re-run it, and to scrape and reglaze loose panes. Done with a utility knife and a scraper on a hundred-year-old bead, it is a sampling question first. Nothing about the advice to seal your house is wrong; the order of operations is what changes.
If old caulking or putty has already been ground off with a power tool and the dust is lying on the sill, the steps or the floor inside, stop, keep people out of that room, do not sweep or use a household vacuum on it, and call us. We can sample the material and the dust on the same visit.
Why Windsor houses carry more of it than most of Ontario
Caulking and putty were used everywhere, but how much of it is still in place depends on when the houses went up. Our Windsor asbestos risk by neighbourhood page works through Statistics Canada's 2021 Census period-of-construction counts for every census tract in the area. The headline number is that 68.0 percent of the City of Windsor's occupied dwellings were built in 1980 or earlier, against 49.2 percent for Ontario as a whole. The county is younger: LaSalle 31.6 percent, Tecumseh 40.2, Lakeshore 40.6, Amherstburg 50.5. Inside the city, the pre-war tracts run far higher; the Walkerville tract on that page is 95.9 percent built before 1981.
In practice that gives three patterns.
Pre-war Walkerville, Sandwich Town, Old Riverside and the older streets off Ottawa Street. Wood double-hung sashes with original glazing putty, frequently behind aluminum storms added in the 1950s or 1960s, and plaster returns inside. A full-frame job here usually means sampling the putty, each visibly different perimeter bead, the storm bedding and the plaster.
1940s to 1960s houses in South Windsor, Ford City, Remington Park and the postwar streets of Riverside. Brick veneer with a caulked perimeter bead at every window and door, steel or wood sashes, and the first generation of aluminum storms. The perimeter bead, recaulked over once or twice since, is the main sample, and the bead at the door brickmould is the second.
1960s to early 1980s houses in Forest Glade, Fontainebleau, Roseland and the newer parts of Tecumseh and LaSalle. Aluminum sliders and casements set with a perimeter bead, drywall returns with joint compound inside, and siding trim sealant on the gables. Fewer distinct materials, but still within the years when asbestos caulking was sold.
After about 1990. Much less likely, and a test is usually one or two samples to settle a bead nobody can date. Canada's Prohibition of Asbestos and Products Containing Asbestos Regulations came into force on December 30, 2018, and the regulation itself says it does not apply to asbestos that was integrated into a structure before that day. The ban stops new material coming in; it does not reach back into the bead already on your window.
Three samples per material: how the count works on a Windsor house
Ontario's rules on sampling are in O. Reg. 278/05 and the Ministry's guide to the regulation. The guide sets out that the lab method is US EPA Test Method EPA/600/R-93/116, that the minimum number of bulk samples comes from Table 1 of the regulation, and that a homogeneous material is one that is uniform in colour and texture. Caulking, putty and sealants fall under "Other material", and for other material of any size the minimum is three samples.
Counted that way, a typical South Windsor brick bungalow with twelve openings is not twelve tests. It is usually three or four materials:
- The original perimeter bead, the same grey material at every window and door on the house: one material, three samples spread across different elevations.
- The recaulk, the white bead someone ran over the top in the 1990s or 2000s: a second material, three samples, even though it sits on the same windows.
- The putty on any remaining wood or steel sashes, with original putty and a later reglazing patch sometimes counting as two materials.
- Whatever the scope adds: the door threshold sealant on a door swap, the storm bedding if storms are coming off, the trim sealant on a re-side.
The guide also says that if one bulk sample of a material meets the definition of asbestos-containing material, the other samples of that material do not have to be analyzed and the whole area can be treated as asbestos-containing. That is why we sample three, send three and ask the lab to stop at the first positive. A careful report can end up cheaper than the sample count suggests.
A quote of "one sample for the windows" is not a shortcut. It is a result that cannot be relied on for the beads it did not sample.
One sampling detail that matters more for caulking than for most materials: the sample has to be the full depth of the bead, not the painted skin. Caulking is a bound material, the asbestos was mixed through it, and a sliver of surface paint tells the lab nothing. We cut a short section of the bead out to its full depth, wetted, and seal the gap with a temporary bead of ordinary caulk so the joint stays weather-tight until the installer arrives.
What we do and do not do
We sample, document and report. The classification of the work, the precautions and the removal, if any, belong to the contractor you hire. Ontario's regulation is written around construction projects and the workers on them, and a window installer who knows a bead has tested positive can plan the cut from the start instead of finding out halfway down the house. Our page on asbestos regulations for Ontario homeowners covers how the rules divide between you and the people you hire.
If you would rather collect a piece yourself, our asbestos lab testing page explains how to do that and what it costs per sample. For caulking we would still suggest a visit: the material is small, there are usually several of them, and cutting them out is the part that needs care. A sealed envelope with one unlabelled chip of grey stuff is the most common thing a lab cannot do much with.
What caulking and putty testing costs in Windsor
| What is being tested | Published price |
|---|---|
| One or two sealants, for example the perimeter bead and the putty on one elevation | $200 to $350 |
| A visit covering several materials: beads, putty, storm bedding, interior returns, siding trim | $300 to $600 |
| Air sampling after a removal, before the new windows go in | $500 to $900 |
| Lab analysis only, for a sample you already hold | $50 to $100 per sample |
| Rush results | add 30 to 60 percent |
These are the same prices as on our asbestos testing cost in Windsor page. The lab fee is included, and we confirm the number of materials before we book. Set against a whole-house window quote that prices every opening with asbestos precautions because nobody checked, one visit usually pays for itself.
How we sample windows and exterior joints
- Start from the contractor's scope, not the house. We ask what is being replaced, repointed, painted or stripped, on which walls, and whether storms or trim are coming off. The scope writes the sample list; the house only tells us how many decades of sealant to expect.
- Walk every elevation. A house that has been partly recaulked can carry a different bead on each side, and the sunny south and west walls are usually the ones that were redone.
- Small, wetted, full depth, sealed. Each sample is a short section of bead or a small piece of putty, cut wetted, bagged on its own and labelled with the opening and the elevation. The gap is sealed with a temporary bead so the house stays tight.
- Chain of custody to an accredited lab. Analysis by polarized light microscopy under EPA/600/R-93/116, results in 2 to 3 business days, certificates attached to a report you can hand to the window company, the painter or the mason. If the install date is close, see how long asbestos testing takes for the rush options.
Most window and door visits take under an hour on site. If the same visit is going to open plaster returns, see asbestos plaster testing; if the house has taped drywall returns, the joint compound is the sample, and we take it in the same trip.
Original windows and the condition period
A home inspector in Windsor who notes "original wood windows, glazing deteriorated" has told you two things: the windows are near the end of their life, and the quote to replace them properly depends on what the putty and caulking are. That belongs in the condition period. Our guide to buying a house with asbestos in Windsor covers how to fit the test into the inspection window, and a negative report on the sealants is worth keeping with the house records for the day you sell.
What a positive result means
A positive result describes a material. It is not a health finding, and it does not mean the windows have to come out. Health Canada's position is that asbestos-containing materials left undisturbed and tightly bound in products in good condition do not pose a significant health risk. Positive caulking on a window you are keeping can stay where it is. Positive caulking on a window being replaced means the installer plans that cut with the right precautions, which is a matter of method and time rather than a different job.
If the installer's quote comes back with a removal line, our removal quote guide explains how to read it and what to compare. Where a larger amount of material comes out, for example a full re-siding on a positive house, an independent asbestos air test afterwards confirms the work area is clear before anyone moves back in or the new cladding goes on.
Common questions
Does old window caulking contain asbestos?
Some of it does, which is why "Caulking/Putties" has its own line on the Ministry of Labour's suspect list and why Health Canada still names putty, caulking and sealants among older products. On a Windsor house built before the mid-1980s, treat the original bead as unknown until a lab has looked at it.
Does window glazing putty contain asbestos?
It can, and pre-war wood sashes in Walkerville, Sandwich and Old Riverside are where we see the most of it. The original putty and any later reglazing patch on the same sash are two materials and get sampled separately, because one can be positive and the other not.
Should I test caulking before replacing windows in Windsor?
If the house went up before the mid-1980s and the installer is doing a full tear-out, yes, and do it as soon as the quote is in hand. Windsor window companies book weeks ahead in the fall, and a 2 to 3 day lab result fits easily inside that wait. For an insert replacement the question is narrower: the putty on the sashes coming out, and whatever bead the installer scrapes.
How many samples does window caulking need?
Three for each material that is uniform in colour and texture, under Table 1 of O. Reg. 278/05, where sealants are "other material". A house with one perimeter bead, one later recaulk and original putty is three materials and nine samples, though the lab stops analysing a material at its first positive.
How much does asbestos caulking testing cost in Windsor?
$200 to $350 for one or two sealants, or $300 to $600 for a visit covering several materials around the openings, lab included. Results in 2 to 3 business days, with rush available at 30 to 60 percent extra.
Can I re-caulk over old asbestos caulking?
Running a new bead over an old one that stays intact is not the disturbance Health Canada warns about. Cutting, scraping or grinding the old bead out is. Most draft-proofing guides say to remove failed caulk before recaulking, so on an older Windsor house test the old bead before following that step.
Do you remove asbestos caulking or replace windows?
No. We sample and report, and we do not sell removal, recaulking, reglazing or windows. A positive result sends you back to your own installer, mason or painter with a report they can plan around, and nothing else from us.
Rather just talk?
(226) 773-8831Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.
- Testing and surveys only, never abatement
- CALA-accredited lab, certificate included
- Results in 2 to 3 business days
Something disturbed today? Call, don't wait.
Or send the details
We respond the same business day with a firm price.