Home / Asbestos in Tiles: Testing Bathroom Wall Tile, Grout and Thinset in Windsor

Asbestos in Tiles: Testing Bathroom Wall Tile, Grout and Thinset in Windsor

Reviewed November 2026 · Windsor & Essex County

Typical cost$200 – $600one or two wall materials, or a visit covering the whole bathroom
Results2–3 business daysrush available
Best forBathroom guts, tub surround removal, regrouting, backsplash tear-outs, leak repairs behind tile

Asbestos in tiles is rarely in the glazed tile itself. In a Windsor bathroom or kitchen it sits in the adhesive, the mortar bed or the plaster and drywall behind the tile, and a test costs $200 to $350 for one or two of those materials, or $300 to $600 for a visit that covers the tub surround, the backer and the floor under it, with lab results in 2 to 3 business days. Ontario's Ministry of Labour names adhesives, construction mastics, joint compounds, wallboard and plasters on its list of materials that may contain asbestos, and Health Canada lists cement and plaster, drywall and floor and ceiling tiles among older products that may still carry it. Ceramic tile is not on either list. What comes off the wall behind it is.

The call usually arrives at a specific moment: the tub surround is coming out, a contractor has quoted a bathroom gut, someone is grinding out cracked grout, or a tile has popped off the wall and the grey material behind it looks nothing like the pink drywall they expected. Each of those cuts, chips or sands a material from the house's first bathroom, and on most of Windsor's housing stock that bathroom went in before the mid-1980s.

Call (226) 773-8831 with the year the house was built, the room, and what is being torn out, regrouted or drilled. We will tell you which layers are worth sampling before anything is booked.

Rather just talk?

(226) 773-8831

Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.

  • Testing and surveys only, never abatement
  • CALA-accredited lab, certificate included
  • Results in 2 to 3 business days
Call now

Something disturbed today? Call, don't wait.

Or send the details

We respond the same business day with a firm price.

No spam, no obligation. Your details go only to our Windsor team.

The short answer

  • The tile is not the suspect. The layers behind it are. Glazed ceramic tile is fired clay. The Ministry's sample list of suspect asbestos-containing material, in its guide to O. Reg. 278/05, has lines for "Adhesives", "Construction Mastics", "Joint Compounds", "Spackling Compounds", "Wallboard", "Cement Wallboard", "Decorative Plaster" and "Textured Paints/Coatings". It has no line for ceramic tile.
  • Grout and mortar beds are not named either, and we still sample them when a job grinds them out. The list describes itself as a general guide, not an all-inclusive one, and a cement material trowelled onto a wall in the 1950s is exactly the kind of thing a lab result settles faster than an argument.
  • A tiled wall is several materials, not one. Tile, grout, the adhesive or mortar, and the plaster or drywall behind it are sampled separately, because under the regulation each material that looks and feels different gets its own count.
  • The floor under the bathroom is its own question. The 9x9 vinyl, the sheet floor and the black glue under them have their own pages and their own samples. This page is about the walls, the tub surround, the backsplash and the thinset and mortar that hold them up.
  • Test before the demolition date. Results take 2 to 3 business days, and a tiled wall is sampled from an edge or through an existing opening, so the bathroom stays usable until the crew arrives.

Five layers in a tiled Windsor bathroom, and which ones get sampled

People say "asbestos tiles" and mean one thing. A tiled bathroom wall in an older Windsor house is a stack, and the stack changed decade by decade. Working from the room inward:

Layer What it usually is in a Windsor house On the Ministry list? When we sample it
Glazed ceramic tile The 4x4 pastel squares in postwar bathrooms, subway tile in pre-war houses, 1970s and 1980s 6x6 and mosaic sheets No Not on its own. Nothing in a fired glaze and clay body is what the lab is looking for
Grout The cement grout between the tiles, often regrouted at least once Not by name When the job grinds it out, or when a sample of the adhesive behind the tile cannot be taken without it
Thinset, mastic or organic adhesive The grey cement thinset or the tan or black paste that holds tile to the wall, used from the 1960s onward instead of a mortar bed Yes: "Adhesives" and "Construction Mastics" Whenever tile is coming off, because this is the layer the scraper goes through
Mortar bed and scratch coat The thick cement bed over metal lath behind pre-1960 and many 1960s tile walls, the "mud set" installation that makes old tile so hard to remove Not by name; plasters and cement wallboard are When a mud-set wall is being demolished, sampled through its full depth
Plaster, drywall and joint compound behind the tile Plaster base and finish coats in pre-war and early postwar houses; drywall or water-resistant greenboard with taped and compounded joints from the 1960s Yes: "Wallboard", "Joint Compounds", "Spackling Compounds", "Decorative Plaster" Whenever the wall is opened, which a bathroom gut always does

Pull one tile off the wall and look at the back of it. If grey cement comes with it in a thick slab, that is a mortar bed and the wall is older. If a thin, even layer of adhesive comes away and you can see paper or gypsum behind it, that is tile glued to drywall. Either way, the material you are looking at is the sample, not the tile in your hand.

Below the wall there is a second stack. Windsor bathrooms were refloored more often than they were retiled, so a 1950s bathroom can have 9x9 vinyl under a 1970s sheet floor under a 1990s ceramic floor, with black glue between the layers. Those layers have their own pages: asbestos floor tiles for the 9x9s, asbestos linoleum and sheet vinyl for the sheet goods and their felt backing, and black mastic for the glue once the floor is gone. On a full bathroom gut we sample the wall stack and the floor stack on the same visit and price it as one job.

Why the bathroom is the room this comes up in

Two things about Windsor make tiled bathrooms a steady source of these calls.

The housing is old, by Ontario standards. The 2021 Census puts 68.0 percent of occupied dwellings in the City of Windsor at built 1980 or earlier, against 49.2 percent for Ontario as a whole. Our Windsor asbestos risk by neighbourhood page maps that tract by tract: 96.3 percent in the South Walkerville tract, 95.9 percent in the oldest Walkerville tract, 92.5 percent in the Riverside tract north of Wyandotte, against 2.3 percent in the newest East Riverside tract and 5.5 percent in Roseland. The Ministry's guide notes that many asbestos-containing materials stayed in use until the mid-1980s, so the first bathroom in roughly two houses out of three in the city was built inside that window.

Bathrooms get redone, and redone hard. A kitchen can be refaced. A bathroom is gutted to the studs: the tub surround comes off, the wall behind it comes down because it is wet, the floor comes up because it is layered, and the ceiling is scraped because it was textured. There is no other room in the house where one weekend disturbs tile adhesive, joint compound or plaster, sheet flooring, floor tile mastic and a textured ceiling at once.

The era of the house tells you which stack to expect:

  • Pre-war and 1940s houses in Walkerville, Sandwich, Old Riverside and the streets off Ottawa Street and Wyandotte: subway or small hex tile set in a mortar bed over metal lath, on a wall of plaster. The thick grey bed and the plaster behind it are the samples.
  • 1950s and early 1960s bungalows in South Windsor, Remington Park, Riverside and Fontainebleau: 4x4 pastel tile, usually still mud-set, sometimes glued, on plaster or early drywall. Both the bed or adhesive and the backer get sampled, and the floor under them is the classic 9x9 era.
  • Late 1960s to mid-1980s houses in Forest Glade, parts of East Riverside and the later streets of South Windsor and LaSalle: tile glued with mastic or thinset to greenboard, with taped and compounded joints. Here the adhesive and the joint compound are the samples, and the floor is more often sheet vinyl than 9x9 tile.
  • After the mid-1980s: the suspect window closes for most of these materials. A house built in Windsor's newer tracts is a different conversation, and we say so on the phone rather than book a visit that will not tell you anything.

A kitchen backsplash follows the same logic on a smaller scale: tile, adhesive, and whatever the wall was made of when the backsplash went in, which on an older house is often a later layer over the original plaster.

The jobs that disturb a tiled wall

Not every job that touches tile needs a sample. The regulation is about disturbing material, and the sample list follows the job.

Job What it actually disturbs What we sample
Full bathroom gut or tub-to-shower conversion Everything: tile, adhesive or bed, backer, the floor stack and usually the ceiling The wall stack through its full depth, the floor stack, the ceiling texture if there is one
Removing a tub surround only Tile and adhesive on three walls, and the wet backer behind the tub, which almost always comes out with it Adhesive or bed, backer, joint compound if the wall is drywall
Regrouting Grinding or raking out the old grout, which cuts into the adhesive behind the joints The grout, and the adhesive where the grinder will reach it
Drilling for grab bars, shelves or a new towel bar A few holes through tile, adhesive and backer Usually a phone conversation, not a visit; if the house is pre-1960 and the backer is unknown, one adhesive and one backer sample
Removing a kitchen backsplash Tile and adhesive, and the face of the wall behind it, which tears when mastic is pried off drywall Adhesive, and the wall surface it is bonded to
Leak repair behind a tub or shower The wet section of backer and whatever tile is over it, cut out in a patch Backer and adhesive at the patch location
Tiling over existing tile Nothing, if the old tile stays bonded and no grinding is done to key the surface Normally no sample; if the installer plans to scarify the old tile, the grout and adhesive

If a tub surround has already come down in a pre-1985 Windsor house and the question is only occurring to you now, stop, leave the debris in the room, close the door, keep the bathroom fan off so it does not pull dust into the rest of the house, and call. We can sample the material that is already exposed and get you an answer before anyone carries it out.

How many samples a tiled bathroom takes

Ontario sets the minimum in Table 1 of O. Reg. 278/05, reproduced in chapter 7 of the Ministry's guide. Three rules do the work on a tiled wall:

  1. A material is sampled per homogeneous area. The guide defines homogeneous material as material that is uniform in colour and texture. The thinset behind the tub surround and the mastic behind the vanity backsplash are two materials if they look and feel different, even in the same room.
  2. "Other material, any size" takes three samples. Adhesives, grout, mortar beds, wallboard and joint compound all fall under item 4 of Table 1, so each distinct material is sampled three times. Surfacing material such as a textured ceiling has its own line and its own counts.
  3. The lab stops at the first positive. The guide says that once one bulk sample of a material meets the definition of asbestos-containing material, the other samples of that material do not have to be analyzed. That caps the lab bill on a positive material and is the reason a three-sample minimum rarely costs three times as much.

The lab method is fixed too: the regulation adopts U.S. EPA test method EPA/600/R-93/116, polarized light microscopy, which is what every accredited lab we send to uses for bulk building materials.

Worked example, a 1958 South Windsor bungalow bathroom with a mud-set 4x4 tub surround, drywall on the other walls and a 9x9 floor:

  • Mortar bed behind the tub surround: one material, three samples
  • Drywall joint compound on the dry walls: one material, three samples
  • 9x9 floor tile and the black mastic under it: two materials, sampled together from the same spot
  • Grout: sampled only if the plan is to grind it out and keep the tile, which in a gut it is not

That is a $300 to $600 visit, priced by the number of materials rather than the number of samples, and the lab stops early on anything that comes back positive.

What we do and do not do

We sample, we send to an accredited lab, and we report. We do not remove tile, grout, thinset or wallboard, we do not retile, and we do not sell the renovation that follows. If a material comes back positive, the report goes to you and to whichever contractor you choose, and our part is finished. That is the arrangement that keeps the result honest: nobody at our end earns more if the wall tests positive.

We also do not diagnose anyone's health or tell you whether past exposure matters. Those questions belong with a physician. What we can tell you is what is in the wall before it comes down.

What tile and grout testing costs in Windsor

Published prices, lab fee included, results in 2 to 3 business days:

Scope Price
One or two materials, for example the adhesive and the backer behind one surround or backsplash $200 to $350
A visit covering the whole bathroom: wall stack, floor stack and ceiling texture $300 to $600
Lab analysis only, for a sample you already hold $50 to $100 per sample
Rush turnaround when a crew is already booked 30 to 60 percent extra

Two things move the price. The first is the number of distinct materials, not the size of the room; a small 1940s bathroom with a mud-set wall, plaster, 9x9 tile and mastic has more materials than a large 1980s one with mastic on greenboard. The second is a positive floor or wall early in the list, which stops the lab on that material and lowers the bill. Our asbestos testing cost page has the full price list for every material in a Windsor house, and if you have already pulled a tile and kept the adhesive that came with it, the lab testing page explains how to bag and label it and what we can and cannot accept.

How we sample a tiled wall

A tiled wall is sampled without wrecking the bathroom. The usual places are the edge of a surround where tile meets the tub deck, behind a tile that is already loose or missing, inside the vanity or medicine cabinet cutout, or at the access panel behind the tub taps, which on a Windsor bungalow is usually in the hall closet or the next bedroom and gives a clean look at the back of the whole wall.

Each sample is taken through the full depth of the material it represents: adhesive down to the backer, backer through to the lath or paper, grout to the bottom of the joint. Samples go into separate labelled bags with the room, the wall and the layer written on them, and travel to the lab under a chain of custody form. The lab reports each material separately, with the asbestos type and percentage where it is present, and the report names the location so your contractor knows which wall it refers to.

Where a sample has to come from a visible spot, the opening is small and we seal it before leaving. The bathroom stays usable until the demolition date.

If the wall tests positive

A positive thinset or mortar bed behind tile that is staying put is not an emergency. Health Canada puts the risk in disturbing the material, and names material that is tightly bound in products in good condition among the situations of low concern. A bonded tile wall with intact grout is about as undisturbed as building material gets.

If the wall is coming down, the report changes who does the work and how. The contractor uses the material, its condition and the quantity to classify the removal under O. Reg. 278/05, and that classification is theirs to make with the report in hand, not ours. Our guide to reading an asbestos removal quote covers what a fair quote for a bathroom looks like and what to compare between two of them. After a larger removal, an independent asbestos air test confirms the room is clear before the new tile goes up. If the bathroom came apart because of a leak, mold testing on the same wet wall can be done on the same visit.

A clean result is just as useful. It turns a bathroom renovation into ordinary construction work, with ordinary disposal and ordinary dust control, and the report is the document that proves it if a tenant, a buyer or a contractor asks.

Common questions

Do ceramic tiles contain asbestos?

The glazed tile itself is fired clay and is not on the Ontario Ministry of Labour's list of suspect materials. What the list does name is what sits behind the tile: adhesives, construction mastics, joint compounds, wallboard and plasters. In a pre-1985 Windsor bathroom those are the layers we sample, not the tile.

Does tile grout contain asbestos?

Grout is not named on the Ministry's list, which calls itself a general guide rather than a complete one. It is a cement product from the same era as materials that are named, so when a job grinds grout out of a pre-1985 wall we sample it instead of guessing. If the grout is staying in place, it is not the sample that matters.

Does thinset or tile adhesive contain asbestos?

It can. "Adhesives" and "Construction Mastics" are both lines on the Ministry's suspect list, and the adhesive is the layer a scraper goes through when tile comes off a wall. On any Windsor house built before the mid-1980s, treat the adhesive behind original tile as unknown until a lab has looked at it.

Can I remove bathroom tile myself in Windsor?

Test first. If the adhesive, the mortar bed and the backer come back clean, the job is ordinary demolition. If any of them is positive, Health Canada's advice is to have asbestos removed by a qualified specialist, and the contractor classifies the work under O. Reg. 278/05. We do the sampling and the report; the removal decision is yours with that report in hand.

How many samples does a tiled wall need?

Three per material that is uniform in colour and texture, under Table 1 of O. Reg. 278/05, where adhesives, grout, mortar and wallboard are "other material". A mud-set tub surround on a plaster wall is two materials and six samples, though the lab stops analysing a material at its first positive, so a positive bed is often confirmed on the first sample.

How much does asbestos tile testing cost in Windsor?

$200 to $350 for one or two materials, for example the adhesive and the backer behind one surround, or $300 to $600 for a visit covering the whole bathroom including the floor stack and a textured ceiling, lab included. Results in 2 to 3 business days, with rush at 30 to 60 percent extra.

Is it safe to tile over old tile that might have asbestos behind it?

Leaving a bonded tile wall in place and tiling over it does not disturb the adhesive or the backer, which is the condition Health Canada describes as low risk. Grinding or scarifying the old tile to key the new layer does disturb it, so if your installer plans to do that on a pre-1985 wall, sample the grout and adhesive first.

Rather just talk?

(226) 773-8831

Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.

  • Testing and surveys only, never abatement
  • CALA-accredited lab, certificate included
  • Results in 2 to 3 business days
Call now

Something disturbed today? Call, don't wait.

Or send the details

We respond the same business day with a firm price.

No spam, no obligation. Your details go only to our Windsor team.

Ready for a straight answer?

Lab-verified results in 2 to 3 business days. Firm quote before we book anything.

Call (226) 773-8831
Call nowGet a quote