Yes, a sample you have already collected can be lab tested. In Windsor, lab analysis alone costs $50 to $100 per sample, results come back in 2 to 3 business days (24-hour rush adds 30 to 60 percent), and the lab tells you whether the material contains asbestos and which type. Keep the bags sealed, label each one, and call before you do anything else with them. The analysis is done by polarized light microscopy, the bulk method Ontario's asbestos regulation names, at an accredited laboratory. What the result can and cannot be used for depends on who needs to read it, which is most of what this page is about.
This page is for the person holding a zip-top bag of ceiling texture, a broken floor tile, a chip of plaster or a scrap of shingle. If nothing has been sampled yet, our asbestos testing in Windsor page and the full price list cover a sampling visit instead.
Call (226) 773-8831 and tell us what is in the bags, which rooms they came from and what the answer is for.
Rather just talk?
(226) 773-8831Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.
- Testing and surveys only, never abatement
- CALA-accredited lab, certificate included
- Results in 2 to 3 business days
Something disturbed today? Call, don't wait.
Or send the details
We respond the same business day with a firm price.
Why people in Windsor end up holding their own samples
We hear the same three stories over and over.
The renovation already started. A kitchen wall in a 1950s east Windsor bungalow gets opened, the plaster comes down in chunks, and somebody stops and thinks to bag a piece. Or a layer of old linoleum peels up during a floor job in a South Windsor split-level and the backing looks fibrous.
A piece broke off by itself. A stained ceiling tile falls in a basement in Riverside, a corner of transite siding cracks behind the garage, or a chunk of pipe wrap crumbles off near the old boiler in a Walkerville two-storey.
Somebody read that a kit is the cheap route. They bought one, followed the instructions, and now want to know where to send it and what the result will mean.
All three are reasonable places to be. The useful questions now are whether the sample you have can answer the question you are asking, and what to do with the bags until it does.
What the lab actually does with your sample
Ontario's asbestos regulation for construction and buildings, O. Reg. 278/05, sets the method in its section 3. The Ministry's guide to the examination rules names it: EPA/600/R-93/116, the US Environmental Protection Agency's method for asbestos in bulk building materials.
In plain terms:
- The analyst looks at the sample under a stereo microscope first, to see its layers and texture and to pick out fibres.
- Fibres go onto a slide under a polarized light microscope. Asbestos minerals show specific optical properties under polarized light (how they bend light, the colours they show in special mounting liquids, their shape) that separate them from fibreglass, cellulose, hair and other fibres found in building products.
- The lab identifies the asbestos type, usually chrysotile in residential materials, sometimes amosite or others, and estimates how much is there.
- The result is reported per sample and per layer. A material counts as asbestos-containing in Ontario at 0.5 per cent or more by dry weight.
The microscopy is the same whether a professional or a homeowner collected the sample. What changes is everything around it: where the sample came from, whether it represents the whole material, and whether anyone else can rely on it.
A lab result is only as good as the sample. The microscope cannot tell you whether the right thing went into the bag.
Accredited labs: what to look for
Two accreditations matter for asbestos in Canada.
- CALA. The Canadian Association for Laboratory Accreditation assesses laboratories against the international standard ISO/IEC 17025 and keeps a searchable directory of accredited labs.
- NVLAP. The US National Institute of Standards and Technology runs an asbestos fibre analysis accreditation program that covers bulk analysis by polarized light microscopy and requires labs to pass proficiency testing twice a year for that method. Many labs serving Ontario hold it.
Every sample we handle goes to a CALA-accredited lab, and you get the lab certificate with the result, not a summary of it.
Before the bags go anywhere: how to keep them
If you already have samples, the job now is simply not to make anything worse.
- Do not open the bags to look. If you can see the material through the plastic, that is enough for us to talk about it on the phone.
- Double-bag anything loose or crumbly. Put the first sealed bag inside a second one. Pipe wrap and crumbly ceiling texture are the materials that shed.
- Label each bag. Room, material and the layer it came from: "kitchen ceiling, texture", "basement floor, tile plus black glue", "back bedroom wall, plaster". One material per bag. A bag that mixes three materials gives one muddled answer.
- Write down the date and what was happening. "Came down when we pulled the cabinet" is useful context for the lab report.
- Leave the area alone until you have the answer. Do not sweep or vacuum debris with a household vacuum. Health Canada's advice on asbestos in the home is to avoid disturbing materials that may contain it.
If you have not taken a sample yet, please do not start now on our account. Health Canada recommends hiring a professional to test before renovating or remodelling, and the cutting and breaking that sampling involves is exactly the disturbance worth avoiding. A sampling visit costs $300 to $600 for a house and is done wet, small and sealed.
What lab testing costs in Windsor
| Service | Typical price | What it covers |
|---|---|---|
| Lab analysis only, sample already collected | $50 - $100 per sample | Accredited PLM analysis and the lab certificate |
| Rush turnaround | Add 30 to 60 percent | 24-hour lab analysis instead of 2 to 3 days |
| Ceiling, floor tile or siding test, we sample | $200 - $350 | One to three samples of one material, collected and documented |
| Residential sampling visit | $300 - $600 | Several materials in one visit, with locations recorded |
These are the same figures as our testing cost page. Billing is per sample, so the count is the main lever. Two bags of the same ceiling texture from two different rooms are usually one material, not two, and we will tell you so before you pay for both.
When a self-collected result is enough
A sample you took yourself, analyzed by an accredited lab, answers a real question honestly when all of these are true:
- It is your own home, and you are the one who will act on the answer.
- It is one material, and you know exactly where the piece came from.
- The material is small in area, or you are deciding whether to leave it alone.
- Nobody else, such as a buyer, a lender, a landlord, a contractor or an insurer, needs to rely on the result.
A typical example: a homeowner in Fontainebleau has a single bag of ceiling texture from a closet where a light fixture came down. They want to know whether to call an abatement contractor or just patch the hole. One well-collected sample, analyzed for $50 to $100, settles that.
When it will not be enough
When a contractor will do the work. Section 10 of O. Reg. 278/05 puts the duty on an owner to have materials that are likely to be disturbed examined before arranging the work, and the Ministry's guide sets a minimum number of bulk samples for each area of homogeneous material. Its Table 1 asks for three samples of most materials, three for thermal insulation of any size, and three, five or seven for sprayed or trowelled surfacing material depending on whether the area is under 90 square metres, 90 to 450, or 450 and up. One bag from a closet does not meet that, and contractors know it. Our page on the asbestos survey before renovation or demolition covers what a defensible survey includes.
When a house is changing hands. Buyers, sellers and their lawyers generally want an independent report with documented locations. A self-collected sample with no chain of custody rarely satisfies a condition in an offer. The buying a house with asbestos guide goes through timing.
When the result is negative and the material is large. A single negative sample from a 1,200 square foot popcorn ceiling says that spot was clean. Ceilings were often patched, re-sprayed or finished in more than one batch. The regulation's sample minimums exist because one sample can miss.
When the result comes back positive. A positive self-collected result is still a real result. The lab can stop analysing the other samples of that material once one is positive, and the whole area can be treated as asbestos-containing, which is what the Ministry's guide says too. From there the next step is quotes against a proper scope, and our asbestos removal quote checklist covers what those quotes should say.
The honest rule: the more people who need to trust the answer, the less a self-collected sample can carry it.
Reading the lab sheet when it comes back
Lab reports look technical, but four lines carry the answer.
- Sample ID and description. Check that it matches your label. "Ceiling texture, kitchen" should not read "floor tile".
- Layers. A floor sample can come back as tile, adhesive and backing, each with its own result. The tile can be clean while the black glue underneath is not, which is why our floor tile testing page treats them as two materials.
- Asbestos type and percentage. "Chrysotile 3%" means asbestos-containing. "None detected" means none was found in what was analyzed.
- Low results. A result under 0.5 per cent is below Ontario's threshold for asbestos-containing material. Labs word low findings differently, so if the sheet says "trace" or gives a range, ask what number it means. Tell any contractor anyway; the figure belongs in the file.
If anything on the sheet is unclear, call and we will go through it with you line by line.
Windsor materials that come to the lab most often
By era and by what people are working on in this city:
- Plaster and joint compound from pre-war and postwar walls in Walkerville, Old Sandwich Town and older Riverside. Our plaster testing page covers layer-by-layer sampling.
- Popcorn and stipple ceiling texture from 1960s and 1970s houses across South Windsor, Forest Glade and the east end. See popcorn ceiling testing.
- 9x9 floor tile, sheet flooring and black adhesive from basements and kitchens of the same era.
- Transite siding and shingles on garages, sheds and older bungalows. See siding and transite testing.
- Pipe wrap and boiler insulation in basements of the older neighbourhoods. Crumbly wrap is the material we most want to hear about before anyone handles it again.
Vermiculite attic insulation is the exception. A single scoop is not a reliable test because the mineral is unevenly mixed, so it has its own multi-point protocol on the vermiculite testing page.
Common questions
Can I get asbestos testing done on a sample I collected myself?
Yes. An accredited lab will analyze a sample that has already been collected, for $50 to $100 per sample in Windsor, with results in 2 to 3 business days. Keep the bag sealed and labelled, and tell us what the result is for so we can say whether it will be accepted.
How much does asbestos lab testing cost in Windsor?
Lab analysis alone is $50 to $100 per sample. Rush 24-hour analysis adds 30 to 60 percent. If we collect the sample, a single-material test is $200 to $350 and a home visit covering several materials is $300 to $600.
How long do asbestos lab results take?
Standard turnaround is 2 to 3 business days from when the lab receives the sample. Rush analysis returns results in about 24 hours.
What method does the lab use?
Polarized light microscopy under the EPA bulk method (EPA/600/R-93/116) that section 3 of Ontario's O. Reg. 278/05 sets out. A material is asbestos-containing at 0.5 per cent or more by dry weight.
Will a contractor accept my self-collected result?
Usually not on its own. Ontario's rules call for an examination before work is arranged, with minimum sample counts per material, and a single bag without documented locations does not meet that. A positive result is still useful, because the material can then be treated as asbestos-containing.
Should I put two rooms of the same ceiling in one bag?
No. One material and one location per bag, each labelled. If two bags turn out to be the same material, we will tell you before you pay for both.
Is a mail-in test kit the same as lab testing?
The lab analysis behind a kit is real microscopy. The kit just moves the sampling onto you. Our test kit vs professional testing page compares the two honestly.
Do you remove asbestos if the result is positive?
No. We only test. Removal goes to an abatement contractor you choose, and an independent air test afterwards confirms the result.
Call (226) 773-8831 with what is in the bags and where it came from. If lab-only analysis fits your situation we will say so, and if a visit makes more sense we will tell you why before you spend anything.
Rather just talk?
(226) 773-8831Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.
- Testing and surveys only, never abatement
- CALA-accredited lab, certificate included
- Results in 2 to 3 business days
Something disturbed today? Call, don't wait.
Or send the details
We respond the same business day with a firm price.