Old linoleum and sheet vinyl can contain asbestos, and the part that usually matters is not the shiny top layer but the grey or white felt backing underneath it. The US EPA lists "the backing on vinyl sheet flooring" among the places asbestos turns up in homes. In Windsor, testing a sheet floor costs $200 to $350 when we take the samples, or $50 to $100 per sample if you already hold a piece, with results in 2 to 3 business days. Until a lab says otherwise, leave the floor where it is and do not tear, scrape or sand it.
This page covers sheet flooring: the rolls that were laid wall to wall in kitchens, bathrooms and back halls. Small square tiles have their own page, asbestos floor tile testing in Windsor, because the materials, the glue and the way they come apart are different.
Call (226) 773-8831 and tell us the room, roughly when the house was built and whether any of the floor is already torn.
Rather just talk?
(226) 773-8831Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.
- Testing and surveys only, never abatement
- CALA-accredited lab, certificate included
- Results in 2 to 3 business days
Something disturbed today? Call, don't wait.
Or send the details
We respond the same business day with a firm price.
The short answer for a Windsor homeowner
- Can linoleum contain asbestos? The everyday word "linoleum" covers two different products. True linoleum is a linseed-oil floor on a woven jute or burlap back. Most of the sheet floors people call linoleum in postwar houses are felt-backed sheet goods, and that felt backing is where the asbestos question sits.
- Is my floor dangerous right now? An intact floor that nobody is cutting, scraping or sanding is the low-risk case. Health Canada says asbestos materials left undisturbed, or sealed behind floorboards, are not a significant risk, and its advice is to avoid disturbing them.
- When does it start to matter? The moment the sheet is torn up. The top layer peels away and leaves the backing stuck to the subfloor, and that backing is what gets scraped, wetted, sanded or left in shreds.
- What should I do? Test before the flooring job is quoted, not after the first corner has been pulled.
Linoleum, sheet vinyl and felt backing: what you are actually looking at
The names get used loosely, by homeowners and by trades, so it helps to separate the three things a Windsor kitchen floor might be.
True linoleum. A linseed-oil based floor with its colour and pattern running through the thickness, on a woven backing that looks like coarse fabric or burlap. It is still made today and was common in older houses. It is not the product the asbestos concern centres on, though a lab is still the only way to rule a specific floor in or out.
Felt-backed sheet flooring. A printed or embossed wear layer bonded to a felt-like paper backing. Turn over a torn edge and the back is smooth, grey, white or tan, and soft enough to fray. This is the floor that most often gets called "the old linoleum" in a 1950s to 1980s Windsor house, and it is the one to test.
Modern sheet vinyl. Later sheet goods on fibreglass or foam backings. In a house that was renovated in the last twenty or thirty years, the top layer may be this, with something older under it.
The backing tells you more than the pattern does. A fabric back points one way, a felt back points the other, and a floor with no edge you can see is a sample, not a guess.
You cannot date a sheet floor from its pattern. Popular looks were reprinted for years, so the pattern is not a date.
Why the felt backing is the part that matters
On an intact floor, the wear layer sits on top and the backing is glued underneath, out of reach. Nothing is being released while it is walked on. The problem is what happens when sheet flooring is removed.
The top peels, the backing stays. Pull up an old sheet floor and the vinyl usually comes away in strips, leaving a mat of felt stuck to the plywood or the concrete. Getting the floor flat for new flooring then means scraping, wetting and grinding that felt, which is exactly the disturbance the rules are written around.
Torn felt crumbles. Ontario's guide to the asbestos regulation defines non-friable material as material that is "not easily crumbled between the thumb and the fingers, or is not already crumbled". A sound sheet floor fits that. Backing that has already been torn into shreds and rubs to fibre between your fingers may not, and that changes how the work is classified (see the Type section below).
Several layers, several materials. Windsor rentals and older family homes often have two or three floors stacked up. A 1950s tile under a 1970s sheet floor under a 1990s floating floor is not unusual, and each layer is its own material with its own result. The glue between them can be a separate material too.
Where we find old sheet flooring in Windsor houses
The same rooms come up again and again, because these were the rooms where a cheap, washable, wall-to-wall floor made sense:
- Kitchens in postwar bungalows across South Windsor, Riverside, Remington Park and Fontainebleau, often under a newer floor that was laid straight over the top.
- Bathrooms and laundry rooms, including second-floor bathrooms in the older two-storeys around Walkerville and Ford City.
- Back entries and mud rooms, where the floor took the most wear and was replaced, or covered, more than once.
- Basement rec rooms and stair landings, sometimes with sheet goods glued directly to the slab.
- Rental units and duplexes, which often have several generations of flooring stacked up.
If you are pulling up carpet or laminate in a pre-1990 house and find a patterned sheet floor underneath, that is the moment to stop and test.
Two Windsor situations we hear about
"I can drop off a piece." One Windsor homeowner contacted us with a piece of linoleum and a piece of shingle already in hand, asking to have both analyzed. That is a lab-only job: $50 to $100 per sample, one bag per material, each labelled with where it came from. Our page on asbestos lab testing for a sample you already have explains how to seal and label it, and when a self-collected result will not be accepted by a contractor.
"The kitchen floor is from the 1970s and we want to replace it now." Calls like this usually come in with a flooring installer already booked. The answer is a sampling visit before the installer arrives. One visit can cover the sheet floor, its backing, any adhesive and the layer underneath, so the installer knows whether they are laying over it, lifting it or waiting for an abatement contractor.
How a sheet floor is tested
We sample in a spot that does not show, usually under the fridge or stove, inside a closet or at a threshold that will be covered anyway.
- We wet the area to keep dust down.
- We cut a small piece through the full thickness, so the lab sees the wear layer, the backing and any glue in one sample.
- Each different floor is its own sample. If there are two layers, we sample both, and the adhesive between them if it is a distinct material.
- Bags are sealed and labelled with room and layer, and the cut is patched so the edge is not left fraying.
- A CALA-accredited lab analyzes each sample by polarized light microscopy, the bulk method that section 3 of O. Reg. 278/05 sets out, and reports each layer separately.
The Ministry's guide to that regulation explains the sampling logic in plain terms: material that is uniform in colour and texture is treated as one homogeneous material, and if one sample of it comes back positive the whole area of that material can be treated as asbestos-containing. That is why one good sample per floor usually settles a room, and why a floor that changes pattern at a doorway is two samples, not one.
A sheet floor is cleared layer by layer. A negative top layer says nothing about the floor underneath it.
What testing costs
These are the published Windsor prices, the same ones on our asbestos testing cost page:
| What you need | Price | Results |
|---|---|---|
| One material sampled by us (one sheet floor, with backing) | $200 to $350 | 2 to 3 business days |
| Home visit covering several materials (floor layers, adhesive, other rooms) | $300 to $600 | 2 to 3 business days |
| Lab analysis of a sample you already collected | $50 to $100 per sample | 2 to 3 business days |
| Rush 24-hour analysis | adds 30 to 60 percent | about 24 hours |
If the kitchen floor is part of a bigger renovation, a whole-house visit is usually better value than testing room by room. Our residential asbestos testing page explains what a full visit covers.
Ontario's Type 1, 2 and 3 rules, and why the backing can move a job up a category
Ontario's asbestos regulation sorts work into three types. The Ministry's guide to the classification sets out the parts that matter for a floor:
- Type 1 includes removing non-friable asbestos material without damaging it, and breaking, cutting or sanding non-friable material only when it is wetted and worked with non-powered hand tools.
- Type 2 includes the same non-friable work done dry with hand tools, and removing or disturbing one square metre or less of friable material.
- Type 3 includes removing or disturbing more than one square metre of friable material, and working non-friable material with power tools not attached to a HEPA dust collector.
For a sheet floor, that means three practical things:
- A sound floor lifted carefully and wet sits at the low end.
- Backing that has been torn and crumbles may be treated as friable, and a whole kitchen of it is well over one square metre.
- A floor sander or grinder on the backing without the right dust collection is in the most demanding category.
We do not remove floors, so this is not a sales pitch for a bigger job. It is the reason to test before anybody starts pulling, because the type of work, and the price of the abatement quote, depends on what the material is and what state it is in.
Your options once you have a result
Negative on every layer. The floor can be removed like any other floor. Keep the lab report with the house records.
Positive, and the floor is staying. Leaving an intact sheet floor in place is a common and legitimate outcome. Write down where it is so the next trade who opens the floor knows.
Positive, and new flooring is going over it. Laying new flooring over an intact old floor is a widely used way to avoid disturbing it. Check finished floor height against doors and appliances before you commit.
Positive, and it has to come up. That is a job for an abatement contractor you choose, working under the Ontario rules above. After the work, an independent asbestos air test is how you confirm the space is clear before the rest of the renovation carries on.
What we would not do is peel a positive floor up over a weekend and scrape the backing dry. That is the version of this job the regulation is most concerned with.
Before you lift a corner to look
The most common way people disturb a sheet floor is by checking what is under it. A few things help:
- Look at an edge that is already open (a threshold strip, a heat register cut-out, the edge under a dishwasher) instead of cutting a new one.
- Do not sweep or vacuum shredded backing with a household vacuum.
- Keep pets and kids off a torn area until it is tested.
- Call before the installer arrives, not the morning of.
If you are buying a house and the inspection report says "possible asbestos-containing sheet flooring", our guide to buying a house with asbestos in Windsor walks through how to test inside a conditional period.
Common questions
Does old linoleum contain asbestos?
It can. True linoleum on a woven jute back is not the main concern, but many older sheet floors called linoleum have a felt backing that may contain asbestos. The US EPA lists the backing on vinyl sheet flooring as a known location. A lab test is the only way to know for a specific floor.
How much does it cost to test linoleum for asbestos in Windsor?
$200 to $350 when we take the sample, $300 to $600 for a visit covering several materials or layers, or $50 to $100 per sample if you already have a piece. Results take 2 to 3 business days, and 24-hour rush adds 30 to 60 percent.
Is it the top layer or the backing that has asbestos?
In felt-backed sheet flooring, the backing is usually the part of concern. That is why we cut through the full thickness, so the lab reports the wear layer and the backing separately.
Can I put new flooring over old linoleum?
Yes, if the old floor is intact. Covering it avoids disturbing it. Test first if you plan to level, scrape or lift any part of it.
What if the backing is already torn and stuck to the floor?
Leave it alone, keep traffic off it and do not vacuum it with a household vacuum. Get it tested. Backing that crumbles can be treated as friable under Ontario's rules, which affects how removal is done.
Do I need to test every layer?
Yes. Each layer is a separate material, and the glue between layers can be separate too. A negative top layer does not clear what is underneath.
Is the sheet floor the same as a 9x9 tile floor?
No. Tiles and sheet goods are different products with different backings and glues. Tiles are covered on our floor tile testing page.
Do you remove asbestos flooring?
No. We only test. Removal goes to an abatement contractor you choose, and an independent air test afterwards confirms the result.
Rather just talk?
(226) 773-8831Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.
- Testing and surveys only, never abatement
- CALA-accredited lab, certificate included
- Results in 2 to 3 business days
Something disturbed today? Call, don't wait.
Or send the details
We respond the same business day with a firm price.