Black mastic, the tarry glue left on a basement slab or subfloor after old tiles come up, can contain asbestos even when the tiles that sat on it did not. Ontario's Ministry of Labour lists "construction mastics (floor tile, carpet, ceiling tile, etc.)" among suspect asbestos materials. In Windsor, testing the glue costs $200 to $350 when we take the sample, or $50 to $100 per sample if you already have a scraping bagged, with results in 2 to 3 business days. Until a lab answers, do not grind, sand or scrape it.
This page is about the adhesive itself, most often the black residue you find when the floor above it is already gone. If the tiles are still down, start with asbestos floor tile testing in Windsor, which covers the tile and the glue together. If the floor is sheet goods with a felt back, see asbestos linoleum and sheet vinyl testing.
Call (226) 773-8831 and tell us where the glue is, how big the area is, and what the new floor is going to be.
Rather just talk?
(226) 773-8831Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.
- Testing and surveys only, never abatement
- CALA-accredited lab, certificate included
- Results in 2 to 3 business days
Something disturbed today? Call, don't wait.
Or send the details
We respond the same business day with a firm price.
The short answer
- Is black mastic asbestos? Sometimes. Black floor adhesives from the decades when asbestos was in routine use can contain it, and the glue is a separate material from the tile, so it is tested separately. The only way to know about the glue on your floor is a lab result.
- Is it a problem if I leave it? Mastic covered by a floor, or sitting intact on a slab nobody is working on, is not releasing anything. Health Canada says there are no significant health risks from asbestos materials in your home that are left undisturbed, and that fibres are released during renovation and demolition.
- When does it matter? When someone wants the slab bare and flat. Grinding, sanding, scraping and shot-blasting are exactly how glue gets turned into dust.
- What should I do first? Test the glue before the flooring installer or concrete grinder is booked. One sample usually settles one area.
What black mastic looks like, and what it is not
Floor adhesive from this era is usually easy to spot once the floor is off: a black or very dark brown layer, thin and hard in some places and thicker in others, often with trowel ridges still showing. Where tiles were pulled, you can sometimes see the square outlines left behind. On a basement slab it can look almost like old paint or tar.
A few things that get mistaken for it:
- Modern construction adhesive in tubes, usually beige, white or grey, used in newer work.
- Paint or floor coatings, which are smooth and even, without trowel marks.
- Tar-based waterproofing on foundation walls, which is a different product in a different place.
- Carpet glue, which can be yellow, brown or grey. Ontario's suspect list names carpet mastic too, so a colour that is not black does not clear it.
Colour is a clue, not a result. We have no way to tell an asbestos-containing adhesive from a clean one by looking, and neither does anyone else. A small scraping and a lab answer the question.
Why the glue is tested on its own
People are often surprised that a floor can have two results. It happens because the tile and the glue are different products, made by different manufacturers, sometimes laid years apart. Ontario's guide to the asbestos regulation lists floor tile, sheet flooring, flooring backing, adhesives and construction mastics as separate items on its sample list of suspect materials. So the lab treats them as separate samples:
- Tile negative, glue negative. The floor is clear.
- Tile positive, glue negative. The glue is not the issue; the tile is.
- Tile negative, glue positive. The one that catches people out. Removing "clean" tile still leaves an asbestos layer on the slab.
- Both positive. Both are handled as asbestos-containing.
If the tiles are long gone and only the glue is left, there is only one material to test, which makes this one of the simplest and cheapest tests on the site.
Where we find old mastic in Windsor homes
In Windsor, the basement is the usual place to find it. The city's postwar housing, the bungalows and one-and-a-half storeys across South Windsor, Riverside, Fontainebleau and Remington Park, very often had tile glued straight to the basement slab. Decades later, someone pulls up carpet or a floating floor and finds black residue underneath.
The other places it turns up:
- Under carpet in a finished basement, where an earlier owner lifted the tiles and laid carpet over the glue that was left.
- Under a newer floating floor, which is often laid straight over old residue because it does not need a bonded surface.
- Kitchens and back halls in older two-storeys around Walkerville and Ford City, on plywood or plank subfloors rather than concrete.
- Commercial and institutional floors, stores and offices with older tile or tile remnants, where a renovation will need a survey anyway.
- Ceilings and ducts. Mastic is not only a floor product. Glued-up ceiling tiles have their own adhesive, covered on our asbestos ceiling tile testing page, and old duct seams were sometimes coated in mastic, covered on our duct tape and HVAC page.
If you are finishing a basement this winter and the plan says "grind the slab", the glue is the first thing to test.
How removal methods change the risk
The reason testing comes first is that almost every way of getting mastic off a floor disturbs it. The common ones are:
Grinding or sanding. A concrete grinder or floor sander turns the glue into fine dust. On a positive glue, this is the worst case. Ontario's regulation puts work on non-friable asbestos material with power tools that are not attached to a dust collector with a HEPA filter into Type 3, its most demanding category (see the next section).
Scraping by hand. Slower, and less dust when done wet. Wet work with non-powered hand tools is how Ontario keeps a job on non-friable material in its lowest category.
Solvents and strippers. Softening mastic with a chemical remover changes how it comes off, not what it is made of. If the glue contains asbestos, the softened residue and anything used to wipe it up still contain it. Ask your contractor how that waste is handled.
Covering it. Leaving the glue where it is and laying new flooring over it disturbs nothing. Whether the new floor can go over residue depends on the product; a floating floor usually can, a glue-down floor or a self-levelling pour may need surface preparation, so ask the installer before you assume.
The cheapest mastic job is the one where the glue tests negative. The second cheapest is the one where it stays covered.
Ontario's Type 1, 2 and 3 rules, as they apply to floor glue
Ontario Regulation 278/05 sorts asbestos work into three types. The Ministry's guide to the classification sets out the operations that matter for glue on a floor:
- Type 1 includes removing non-friable asbestos material without damaging it, and breaking, cutting, grinding or sanding non-friable material that is wetted, using non-powered hand tools.
- Type 2 includes working non-friable material with non-powered hand tools when it is not wetted, and removing or disturbing one square metre or less of friable material.
- Type 3 includes working non-friable material with power tools not attached to dust-collecting devices with HEPA filters, and removing or disturbing more than one square metre of friable material.
The guide describes non-friable material as material "not easily crumbled between the thumb and the fingers, or is not already crumbled". Hard, well-bonded mastic usually fits that. Glue that has dried out and flakes, or residue that has already been broken up by a first attempt at scraping, is a judgement for the contractor and the lab report, not for a guess.
Three practical points for a Windsor homeowner:
- A positive glue does not automatically mean an expensive job. Careful wet hand work sits at the low end of the scale.
- A grinder without the right dust collection is in the top category. That is the scenario to avoid, and the reason to test before a concrete contractor quotes "grind and polish".
- The result decides the quote. An asbestos removal quote is only accurate when the contractor knows which materials are positive.
We test only. We do not remove mastic, grind floors or sell abatement, so this is the information you need to brief the people who do.
How we sample floor glue
Sampling glue is quick and leaves almost no mark.
- We wet the spot to keep dust down.
- We take a small scraping through the full depth of the glue, down to the slab or subfloor, in a corner or under where an appliance or cabinet will sit.
- Different-looking glues are different samples. A black area and a yellow area in the same basement are two materials. So are glue under tile and glue under carpet.
- Each sample is sealed and labelled with the room and what was above it.
- A CALA-accredited lab analyzes it by polarized light microscopy, the bulk method set out in section 3 of O. Reg. 278/05, and reports each sample separately.
The Ministry's guidance treats material that is uniform in colour and texture as one homogeneous material. One good sample per glue type usually covers a room. A basement where the glue changes at a doorway is two samples.
Glue is cleared sample by sample. A negative result on the black residue in the rec room says nothing about the yellow carpet glue in the laundry room.
If you already have a scraping
If some of the glue has already come up, you can bring us a sample instead of booking a visit. It is a lab-only job at $50 to $100 per sample. Our page on asbestos lab testing for a sample you already have explains how to wet, bag and label it, and when a contractor will want a sample taken by someone else.
Do not grind or chip a fresh piece off to get a sample. If nothing has come loose on its own, a sampling visit is the safer way.
What testing costs
These are the published Windsor prices, the same ones on our asbestos testing cost page:
| What you need | Price | Results |
|---|---|---|
| One material sampled by us (one glue area) | $200 to $350 | 2 to 3 business days |
| Home visit covering several materials (glue, tile, other rooms) | $300 to $600 | 2 to 3 business days |
| Lab analysis of a sample you already collected | $50 to $100 per sample | 2 to 3 business days |
| Rush 24-hour analysis | adds 30 to 60 percent | about 24 hours |
If the glue is one part of a larger basement or kitchen renovation, a whole-house visit through our residential asbestos testing service usually works out cheaper than testing one material at a time. For stores, offices and rental buildings, see commercial asbestos testing.
Your options once you have a result
Negative. The glue can be removed like any other floor adhesive. Keep the lab report with your house records and show it to the flooring contractor.
Positive, and the new floor can go over it. Leaving it covered is common, legitimate and usually the cheapest outcome. Write down where it is, so the next person who opens the floor knows.
Positive, and the slab has to be bare. That is a job for an abatement contractor you choose, working under the Ontario rules above. After the work, an independent asbestos air test is how you confirm the basement is clear before the drywall and flooring go in.
Some of it has already been ground. Stop work, keep people and pets out of the area, do not sweep or use a household vacuum, and get the glue and the dust tested. Call us and we will tell you what to sample first.
Before you start pulling up the old floor
- Check an edge that is already open, such as a heat register or a threshold strip, instead of cutting into a finished floor to look.
- Do not rent a grinder until the glue has a result.
- Tell your installer what you found. A good installer will ask anyway.
- If you are buying a house and the inspection report mentions "black adhesive" or "possible asbestos flooring", our guide to buying a house with asbestos in Windsor covers testing inside a conditional period.
Common questions
Is black mastic always asbestos?
No. Some black floor adhesives contain it and some do not. The colour and the age of the house raise the odds, but only a lab result tells you about the glue on your floor.
How much does it cost to test mastic for asbestos in Windsor?
$200 to $350 when we take the sample, $300 to $600 for a visit covering several materials, or $50 to $100 per sample if you already have a scraping. Results take 2 to 3 business days, and 24-hour rush adds 30 to 60 percent.
Can the glue have asbestos if the tiles tested negative?
Yes. The tile and the glue are separate materials and are tested separately. A clean tile on positive glue is a common result.
Can I put new flooring over black mastic?
Often, yes. Covering it disturbs nothing. Whether a particular floor can go over residue depends on the product, so check with the installer. Test first if the plan involves grinding, sanding or levelling compound that needs a bare slab.
Is it safe to grind black mastic off a basement floor?
Not before it is tested. Ontario puts work on non-friable asbestos material with power tools that lack HEPA dust collection in its most demanding category. If the glue is negative, it is an ordinary floor preparation job.
Does carpet glue contain asbestos too?
It can. Ontario's suspect material list names carpet mastic alongside floor tile and ceiling tile mastic. A glue that is not black still gets tested.
Do you remove mastic?
No. We only test. Removal goes to an abatement contractor you choose, and an independent air test afterwards confirms the area is clear.
Rather just talk?
(226) 773-8831Answered 24/7. Tell us the material and the year the place was built, and you'll have a firm price on the call.
- Testing and surveys only, never abatement
- CALA-accredited lab, certificate included
- Results in 2 to 3 business days
Something disturbed today? Call, don't wait.
Or send the details
We respond the same business day with a firm price.